Our company is established and respected in the field, meaning that all of our electronic cigarettes are made to provide you with the best possible smoking experience for the longest amount of time. On a regular basis, however, there are certain things you might want to do to make sure that your e cig kit is functioning at its greatest capacity.
Taking Care of The Atomizer
The atomizer is the part of your e cig that produces the heat necessary to vaporize the eLiquid. You want to drain your atomizer every two or three days for best possible vapor production and to ensure it works as long as possible. To drain it, you first need to take the cartridge out of the atomizer. Next, you can take a small amount of tissue and push it into the atomizer where the cartridge in your e cigs would normally be, then blow into the hole at the end of the atomizer where the battery is connected. This will push any remaining liquid onto the tissue. After you’ve drained the atomizer, you should place a drop or two of eLiquid right into it before you use the e cig again.
For best functioning capacity, every new atomizer should be drained before use. New atomizers typically come pre-filled with a primer fluid, and this fluid can flow into the atomizer. The excess liquid can build up and decrease the vapors of your e cigarette. If you have already used your new atomizer without draining it, there is a “breaking-in” period. When you use your e cigarettes in this period, it will slowly increase the amount of vapor being produced. However, your electronic cigarettes will work better from the beginning if you drain the atomizer before first using it. When you are not using your e-cig, you should remove the cartridge. This will prevent excess liquid from building up inside your electronic cigarettes.
Before using a new e-cig, you want to charge the batteries for at least four hours. This will improve battery efficiency and capability so that your device is functioning correctly from the start.
You also want to make sure that the battery compartment and contacts stay clean and dry. The atomizer can leak into the battery area, so it’s important to clean that area every so often. The area should always be cleaned before you charge your battery.
When you’re not using your electronic cigarette, you should prevent unnecessary contact between the battery and atomizer. It’s possible for liquid to leak out of the atomizer and into the battery area. This can cause your device to work improperly or malfunction.
Cleaning and Maintaining Cartridges
You want to take care of your cartridge so that the flavor and output of your device remains at its best. You can clean your cartridge by rinsing it in hot water. This will allow you to reuse it and will ensure that it is always functioning properly. It will also remove any excess buildup or residue in your electronic cigarette. For proper flavor, you should aim to replace your cartridge every 3-5 days or sooner if you notice that it is no longer wicking properly.
To best conserve the flavor and output of your electronic cigarette, you want to store your eLiquid in a cool, dark space and avoid prolonged contact with direct sunlight. In addition, all parts should be kept away from children and animals, as each of these parts can contain nicotine.
Using these tips, you can prolong the life and power of your device and ensure that it is working properly at all times.